Web Hosting by Netfirms | Free Domain Names by Netfirms

Emulation

Cemu (DOS)

This is a DOS based EMU package that requires a stand alone PC for best operation. There are a couple of different flavours, but the operational concept is the same. Generally, your Here is your checklist

Emulation cable
AVR with appropriate IRD2PC flashed on (using Jeepers)
PC (486DX266 or higher is recommended, lots 'o RAM a plus as well)
One of Cemu or ChinamanCEMU
Custom dish.bin file (dish.bin or rev381 for bev)

Cemu
    a) Format a floppy using a DOS window -> format c:/s
    b) Unzip your Cemu to the floppy
    c) Copy your dish.bin or rev381.bin to the floppy
    d) Edit the information in cemu.ini
        i) Comm Port
        ii) camid(CAM#)
        iii) irdnum(IRD#)
        iv) boxkeys
            Note: some older cemu versions require the time zone information to be edited in bin file itself
    e) Save changes
    f ) Do a memory dump and turn off your satellite receiver (IRD) via power cord.
    g) Connect the 9 Pin connector of your cable to your Com port.
    h) Connect the 25 Pin Connector of your cable to your AVR
    i ) Put your AVR into your IRD.
    j ) Boot your PC with the floppy inserted (ensure PC bois has floppy as first boot device).
    k) Power on the IRD when PC booted.
    l ) At command prompt, type cemu and hit enter.
    m) Wait till the program is all setup (keys, etc. may take a minute or two) then watch TV!

Chinaman
    a) Double click the exe and follow the extraction instructions.
    b) Edit the cemu.ini file either with notepad, or boot the floppy and edit there
    c)